Stainless Steel Components
Constructed from 6005-T5 SCH 40 aluminum alloy pipe with SCH 80 posts and spaced not more than 5′ on center. BMC railing is unique in the industry due to the use of 304 stainless steel flanges. Stronger than aluminum and noncorrosive, they are polished to a #4 brushed finish to provide an attractive appearance.
Custom designed and assembled for fast and accurate installation on sloped, curved or straight run surfaces. No extra charges for retooling as product is fabricated to fit your needs.
Section 05 52 13 – Pipe and Tube Rails
BMC 2 Line Rails
OSHA Compliant
BMC 3 Line Rails
OSHA Compliant
BMC Spindle Rails
IBC Compliant
BMC Railing Benefits Include:
- Meets or exceeds OSHA, and local building code requirements.
- Manufacturer Qualifications: Company specializing in manufacturing with no less than three years of experience.
- Railing shall withstand the effects of gravity loads and the following loads and stresses within limits and under conditions indicated:
- Handrails and Top Rails of Guardrail System:
- Uniform load of 50 lbf/ft. (0.73 kN/m) applied in any direction
- Concentrated load of 200 lbf (0.89 kN) applied in any direction
- Uniform and concentrated loads need no be assumed to act concurrently
- Infill Area of Guardrail System:
- Concentrated load of 50 lbf (0.22 kN) applied horizontally on an area of 1
sq. ft. (0.093 sq. m). - Uniform loaf of 25 lbf applied horizontally
- Infill load and other loads need not be assumed
- Concentrated load of 50 lbf (0.22 kN) applied horizontally on an area of 1
- Handrails and Top Rails of Guardrail System:
- Powder coat finishes available.
- Railing is protected during shipping, storage, and installation.
Over 25 Years Experience Fabricating Guardrails with Mechanical Connections
BMC provides a variety of designs and finishes for our BMC Rails, BMC 3-Line Rails, BMC Spindle Rails, and BMC Mesh Rails. Our BMC rails can be mounted to almost any surface.
Because we use an internal tee plug secured with a stainless steel rivet, we are able to fabricate an extremely durable unit with few visible connections. The use of all stainless steel fasteners and flanges creates a highly corrosion resistant, low cost, and attractive railing appropriate for almost any circumstance. The unique stainless steel flanges are fabricated from 304 Stainless Steel, adding strength, rigidity, and corrosion resistance, especially when compared with the traditional cast aluminum flanges supplied by most manufacturers.
